Third Calibration

Black spray paint does not mix with Makerjuice G+

After trying a few aborted calibration prints, I found that the black spray paint softened and prevented the calibration cylinders from sticking to the build plate. The spray paint came off like acrylic paint (like peeling food plastic wrap) with a razor blade, and nail polish remover got the rest. Using a grinder, I was able to rough up the plate significantly.

Roughed up lift plate with a grinder

In my frustration to get the lift level correct with the fluid, I added a pre-print level adjuster to the lift. 200 microns makes a HUGE difference in the vat level since my lift is so tight to my vat.